Common Mistakes Made by Amateur Homeowners with Pressure Washers

Do you feel under pressure at the thought of using your pressure washer? It wouldn’t be surprising. Pressure washers are deceptively tricky to use — especially if you aren’t used to using one.

Despite the pressure (no pun intended) to get it right, you might not even know when you’re getting it wrong. This article looks at a few problems that might occur when you are pressure washing in New Smyrna Beach, FL.

How to Avoid Problems While Pressure Washing in New Smyrna Beach, FL

There are two kinds of problems in this world: avoidable and unavoidable. Avoidable problems usually pop up when you don’t plan ahead of time and fail to put preventative measures in place. Unavoidable problems happen when a mistake is made while you are doing something, and there is nothing you can do about it. 

This article is here to help you side-step both types of issues while you are power washing in New Smyrna Beach, FL. Pay attention to some of our well-earned wisdom, and you can both prevent and avoid a power washing disaster.

How to Prevent Pressure Washing Problems

It’s likely that the first mistake you’ll make as an amateur pressure washer will involve failing to prepare yourself by failing to set up your work area to be pressure washed. Before you begin pressure washing anything, remember to:

• Check if the item can be pressure washed
• Correctly put on safety equipment (e.g., goggles, close-toed shoes, etc.)
• Pick the right timing for pressure washing an area (e.g., before painting, before cold weather sets in, etc.)
• Choose the right nozzle for your pressure washer

Assessing the situation and making sure that you are correctly prepared to pressure wash can make the difference between making a mistake and doing an error-free job. Sometimes, a little preventive action can help to make your power washing experience a great one.

What to Know to Avoid Power Washing Mistakes

You should always be trying your best to prevent issues from happening while power washing. However, you may be unsure how you can avoid the run-of-the-mill mistakes that happen while you’re doing the job. 

Just like taking actions to avoid preventable mistakes, knowing what missteps to avoid before you start washing can help prevent errors. So, before you pull out the power washer, try to keep the following in mind:

• Don’t spray the object directly head-on — you need to angle it
• Keep the pressure washer off until you’re ready to use it to avoid burning it out
• Try not to get too close to the object and wash it at full blast — it will damage the object
• It’s not good to spray at vulnerable areas that water can seep through, like windows, siding seams, doorways, etc.

Power washers are powerful tools. That is the most important point to keep in mind. 

Keep Safe and Make Fewer Mistakes While Power Washing

Most people new to power washing might not know how dangerous it can be. But if you really think about it, these sprayers can strip paint from a house or scar concrete. Imagine what they can do to your body.

As long as you make sure that you prepare beforehand and keep in mind these few common-sense tips, your pressure-washing experience will be a success!